Available Stock: In Stock
Model: KP542411
V - paneling Tongue & Groove router bit
Carbide
Tipped - Tongue & Groove (V-paneling)
The cutter is used for joining paneling to form a 'V' groove. Great for
ceilings.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will..
R 2,162.52
Ex VAT:R 1,880.45
Available Stock: In Stock
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 980.09
Ex VAT:R 852.25
Available Stock: In Stock
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 918.22
Ex VAT:R 798.45
Out Of Stock
Available Stock: Out Of Stock
Model: KP542411-1
REPLACEMENT 3.2MM CUTTER FOR THE V JOINT TONGUE & GROOVE ASSE....
R 441.43
Ex VAT:R 383.85
Available Stock: In Stock
Model: KP609011-1
Spare
cutter (slot cutter)
Router bit spare part
The slot cutter is compatible with the following cutters:
KP609011
KP609411
KP851
KP551....
R 221.66
Ex VAT:R 192.75
Available Stock: In Stock
Model: KP609011-2
Spare
arbor
Router bit spare part
The arbor is compatible with the following cutter:
KP609011....
R 173.08
Ex VAT:R 150.50
Showing 1 to 6 of 6 (1 Pages)