Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP208041
Ball cutting
router bit
Carbide
Tipped
Cut channels for pipes or cables using the ball end bit. The profile requires
the cut to be made in a single pass. To reduce stress on the bit, cut an initial
groove using a straight bit matching the diameter dimension of the ball end bit.
Cut chan..
R 593.57
Ex VAT:R 516.15
Available Stock: In Stock
Model: KP319041
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling/flipping the workpiece between passes.
The corner bead r..
R 593.17
Ex VAT:R 515.80
In Stock Soon
Available Stock: In Stock Soon
Model: KP7005
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 591.04
Ex VAT:R 513.95
Available Stock: In Stock
Model: KP1003
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 591.04
Ex VAT:R 513.95
Available Stock: In Stock
Model: KP213041
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
R 590.93
Ex VAT:R 513.85
In Stock Soon
Available Stock: In Stock Soon
Model: KP2810
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by this..
R 580.75
Ex VAT:R 505.00
Available Stock: In Stock
Model: KP212031
Plunge
cut Classical Pattern router bit
This
plunge type decorative profile cutter will eliminate uncomfortable sharp edges and
offer a quality look and feel to the workpiece.
Made
to cut grooves in surfaces. This router bit can also be used to profile the edge
of a workpiece when u..
R 578.85
Ex VAT:R 503.35
Available Stock: In Stock
Model: KP1210
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-ov..
R 577.88
Ex VAT:R 502.50
Available Stock: In Stock
Model: KP211431
Profile
router bits with plunge cut capability
Classical Plunge Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and ..
R 554.07
Ex VAT:R 481.80
Available Stock: In Stock
Model: KP1134113
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead t..
R 553.78
Ex VAT:R 481.55
Available Stock: In Stock
Model: KP319031
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling the workpiece between passes.
The corner bead router bit..
R 553.78
Ex VAT:R 481.55
In Stock Soon
Available Stock: In Stock Soon
Model: KP3202
22° Bevel
Trim bit
Carbide
Tipped
This 22 degree angled bevel carbide-tipped bit reduces vibration, and its three-flute
configuration produces a very smooth cut. Some craftsmen apply this router bit in trimming
melamine edging to reduce the sharp edge that normally exists on melamine edg..
R 546.08
Ex VAT:R 474.85