Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP4302
Arbor
Arbor - Slot cutter
Use this arbor fitted with a slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure tha..
R 989.46
Ex VAT:R 860.40
Available Stock: In Stock
Model: KP238431
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
R 983.88
Ex VAT:R 855.55
Available Stock: In Stock
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 980.09
Ex VAT:R 852.25
Available Stock: In Stock
Model: KP3702
Edge
profile router bits
Ogee & Fillet profile
Carbide
Tipped
The ogee and fillet profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape.
Adding to the depth of cut a fillet (bead) will be produced.
..
R 971.87
Ex VAT:R 845.10
Available Stock: In Stock
Model: KP303431
Edge
profile router bits
Double round profile
Carbide
Tipped
The double round profile router bit is designed for creating decorative mouldings or edge profiles.
These cutters allow you to shape two roundovers. A bead over the top corner is possible when increasing
the depth of cut. By r..
R 971.87
Ex VAT:R 845.10
Available Stock: In Stock
Model: KP103510
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load..
R 962.95
Ex VAT:R 837.35
Available Stock: In Stock
Model: KP3701
Edge
profile router bits
Ogee & Fillet profile
Carbide
Tipped
The ogee and fillet profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape.
Adding to the depth of cut a fillet (bead) will be produced.
..
R 946.74
Ex VAT:R 823.25
Available Stock: In Stock
Model: KP372451
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before appl..
R 936.45
Ex VAT:R 814.30
Available Stock: In Stock
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 918.22
Ex VAT:R 798.45
Available Stock: In Stock
Model: KP313021
Edge Profile router bit
Classical Cove profile
The classical cove router bit is an all-time favourite. The way shadows form when light falls on the final cut profile,
makes this router bit profile really attractive. It is a great choice for projects like jewellery boxes, decorative mouldin..
R 909.54
Ex VAT:R 790.90
In Stock Soon
Available Stock: In Stock Soon
Model: KP303021
Edge
profile router bits
Double round profile
Carbide
Tipped
The double round profile router bit is designed for creating decorative mouldings or edge profiles.
These cutters allow you to shape two roundovers. A bead over the top corner is possible when increasing
the depth of cut. By r..
R 904.76
Ex VAT:R 786.75
Available Stock: In Stock
Model: KP370451
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
12,7 mm ..
R 902.06
Ex VAT:R 784.40