Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP7004
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 627.38
Ex VAT:R 545.55
Available Stock: In Stock
Model: KP203431
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 626.35
Ex VAT:R 544.65
Available Stock: In Stock
Model: KP2805
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by ..
R 622.09
Ex VAT:R 540.95
Available Stock: In Stock
Model: KP234021B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..
R 617.55
Ex VAT:R 537.00
Available Stock: In Stock
Model: KP1602
Edge
profile router bits
Roman Ogee profile
Carbide
Tipped
The roman ogee profile router bit is designed for creating decorative mouldings or edge profiles.
These cutters allow you to shape one concave and one convex shape. A bead over the top corner is possible when increasing
the dept..
R 604.84
Ex VAT:R 525.95
Available Stock: In Stock
Model: KP328041
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a concave shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Bearing guide aids control and shaping
Smooth edge requires little or no sanding before applying..
R 601.80
Ex VAT:R 523.30
Available Stock: In Stock
Model: KP329031
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
6,35..
R 601.80
Ex VAT:R 523.30
Available Stock: In Stock
Model: KP320011
Large Bead router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
..
R 601.68
Ex VAT:R 523.20
Available Stock: In Stock
Model: KP210041
Profile
router bits with plunge cut capability
Ogee
shape
Use this carbide tipped plunge shape bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and their enlarg..
R 601.22
Ex VAT:R 522.80
Available Stock: In Stock
Model: KP1703
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before ..
R 600.07
Ex VAT:R 521.80
Available Stock: In Stock
Model: KP308431
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 598.29
Ex VAT:R 520.25
Available Stock: In Stock
Model: KP308441
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 598.06
Ex VAT:R 520.05