Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP1001
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 434.93
Ex VAT:R 378.20
Available Stock: In Stock
Model: KP570831
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 434.36
Ex VAT:R 377.70
Available Stock: In Stock
Model: KP236011B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Pattern Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
..
R 433.84
Ex VAT:R 377.25
Available Stock: In Stock
Model: KP116031
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut q..
R 431.14
Ex VAT:R 374.90
Available Stock: In Stock
Model: KP1101
Slot Cutter
Use this slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.
This router bit has a
6.35 mm shank (shaft) that will fit most small or large routers
with the correct size collet. Please ensure that you select a r..
R 430.10
Ex VAT:R 374.00
Available Stock: In Stock
Model: KP19MM L-2
Two
flute Metric Straight bit
Carbide
Tipped
In choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut qual..
R 425.56
Ex VAT:R 370.05
Available Stock: In Stock
Model: KP1207
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, ..
R 414.35
Ex VAT:R 360.30
Available Stock: In Stock
Model: KP4104
3
Wing Slot Cutter
Replacement blade
For
3-Wing carbide tipped
Three-wing slot cutters are convenient where intermediate feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP..
R 411.70
Ex VAT:R 358.00
In Stock Soon
Available Stock: In Stock Soon
Model: KP2802
Beading bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by this router
..
R 411.18
Ex VAT:R 357.55
Available Stock: In Stock
Model: KP113457
Double
flute Straight bit
In cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two ..
R 410.67
Ex VAT:R 357.10
Available Stock: In Stock
Model: KP205LA
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead t..
R 410.67
Ex VAT:R 357.10
Available Stock: In Stock
Model: KP212491
Dovetail bit
Carbide
Tipped
Our dovetail routers consist of a solid steel body and carbide tipped cutting edges.
With its 14 degree profile angle, it is applied in
most common half-blind dovetails. Router cutters are available
in shank sizes ¼' and ½'.
This router bit has a
..
R 408.88
Ex VAT:R 355.55