Select your Pro-Tech Category below
In Stock Soon
Available Stock: In Stock Soon
Model: KP10353
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance & reduced vibration under cutting load. ..
R 1,165.07
Ex VAT:R 1,013.10
Available Stock: In Stock
Model: KP1705
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect ½ radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no s&ing before appl....
R 1,144.54
Ex VAT:R 995.25
Available Stock: In Stock
Model: KP372461
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect ½ radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no s&ing before appl....
R 1,132.81
Ex VAT:R 985.05
Available Stock: In Stock
Model: KP1212
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-ov..
R 1,132.64
Ex VAT:R 984.90
Available Stock: In Stock
Model: KP310471
Edge
profile router bits
Bevel profile
Carbide Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling & decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where extr..
R 1,110.38
Ex VAT:R 965.55
Available Stock: In Stock
Model: KP3801
Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will exp& & contract across the
grain, & a..
R 1,104.92
Ex VAT:R 960.80
Available Stock: In Stock
Model: KP49572
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors & drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used for ..
R 1,094.46
Ex VAT:R 951.70
Available Stock: In Stock
Model: KP530011
Drawer lock router bit
Carbide
Tipped - Drawer lock
The router bit makes it easy to join drawers. The glue surface is greater
when compared to a st&ard butt joint, thus increasing the overall strength &
makes it easier with alignment during assembly.
The cutter is design....
R 1,068.93
Ex VAT:R 929.50
Available Stock: In Stock
Model: KP530411
Drawer lock router bit
Carbide
Tipped - Drawer lock
The router bit makes it easy to join drawers. The glue surface is greater
when compared to a st&ard butt joint, thus increasing the overall strength &
makes it easier with alignment during assembly.
The cutter is design....
R 1,068.93
Ex VAT:R 929.50
Available Stock: In Stock
Model: KP49232
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, & their..
R 1,062.03
Ex VAT:R 923.50
Available Stock: In Stock
Model: KPFJ-02
Spare
blade
Router bit spare part
The cutter blade can be used as a spare blade for the KPFJ-01 finger
jointer or it can be added to the stack of finger jointer blades to have a
total of 4 blades.....
R 1,047.48
Ex VAT:R 910.85
Available Stock: In Stock
Model: KP234431B
Profile
router bits with plunge cut capability & top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These an..
R 1,028.85
Ex VAT:R 894.65