Saw blade for circular saws
Carbide
Tipped - Saw blade for circular saws - Crosscut/Laminate
The professional saw blade cuts straight, accurately and vibration free.
High quality tungsten carbide is used with a micro grain structure to achieve
a high edge retention and remains sha..
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 1 1/4' or 30mm diameter spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction ..
Forstner
bit - Ø 3 5/8'
High-Speed
Steel
The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.
The Forstner bit is guided by the wide..
Spindle
cutter - Reversible Rail & Stile
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used in door manufacturing to profile and join the rails and stiles. For example: Kitc..
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the ra..
Finger joint router bit
Carbide Tipped
- Finger joint
The router bit is a counter profile bit designed to join the end grains of wood.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the ..
Multiform
Multiform - Moulding maker router bit
Use any portion of the router bit to create many profile possibilities.
Create your own design!
Below is an example of a profile made by flipping over the board and
adjusting the height of cut and setting the router table fence.
..
V - paneling Tongue & Groove router bit
Carbide
Tipped - Tongue & Groove (V-paneling)
The cutter is used for joining paneling to form a 'V' groove. Great for
ceilings.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will..
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
Saw blade for circular saws
Carbide
Tipped - Saw blade for circular saws - Crosscut
The professional saw blade cuts straight, accurately and vibration free.
High quality tungsten carbide is used with a micro grain structure to achieve
a high edge retention and remains sharper for ..
Double Round Over router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the..