Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP601204
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
....
R 1,877.43
Ex VAT:R 1,632.55
Available Stock: In Stock
Model: KP19
Spindle
cutter - Glue joint (single F-joint)
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to....
R 1,845.58
Ex VAT:R 1,604.85
Available Stock: In Stock
Model: KP601201
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
....
R 1,845.58
Ex VAT:R 1,604.85
Available Stock: In Stock
Model: KPFJ-01
Finger joint router bit
Carbide
Tipped - Finger joint
The router bit is a counter profile bit designed to join the end grains of wood. The finger joint is much stronger than the conventional butt joint, due to the increase of glue surface area.
The cutter is designed to be used ....
R 1,828.85
Ex VAT:R 1,590.30
Available Stock: In Stock
Model: KP TGV01
TONGUE & GROOVE THREE FLUTE V JOINT 1/8' x 1/2'....
R 1,792.85
Ex VAT:R 1,559.00
Available Stock: In Stock
Model: KP532711
TONGUE & GROOVE - ANGLE 2' x 1' 1/2' SHANK....
R 1,783.13
Ex VAT:R 1,550.55
Available Stock: In Stock
Model: KP708010
Spindle
cutter - 3 lip classic bead
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ¼ rounds & coves
KP800020 - 3/4' - 1/2' spacer rings
&n....
R 1,780.66
Ex VAT:R 1,548.40
Available Stock: In Stock
Model: KP404441
Panel Raiser - Double Cove router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will exp& & contract across th..
R 1,780.66
Ex VAT:R 1,548.40
Available Stock: In Stock
Model: KP408451
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will exp& & contract across the
grain..
R 1,780.66
Ex VAT:R 1,548.40
Available Stock: In Stock
Model: KP412431
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will exp& & contract across the
grain..
R 1,780.66
Ex VAT:R 1,548.40
Available Stock: In Stock
Model: KP532611
TONGUE & GROOVE - ANGLE 1 1/2' x 1' 1/4' SHANK....
R 1,724.89
Ex VAT:R 1,499.90
Available Stock: In Stock
Model: KPFB300
Forstner
bit - &O/; 3'
High-Speed
Steel
The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.
The Forstner bit is guided by the ....
R 1,702.98
Ex VAT:R 1,480.85