Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP906
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..
R 1,280.18
Ex VAT:R 1,113.20
Available Stock: In Stock
Model: KP2813
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut a quarter-round shape bounded by fillets, known as a bead, in one pas..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP13
Spindle
cutter - Wedge Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP12
KP800020 - 3/4' - 1/2' spacer rin..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP412411
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP57136
Coutertop
trimming router bit
6
Wing Carbide
Tipped
Create extra-smooth shallow recesses in countertops with this 6-wing router
bit. The radiused cutting tips produce an edge that's easy on the fingers and simple to clean. Used in a
large handheld router.
This router bit has a
..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP318421
Edge
profile router bits
Quirk Topped Ogee profile
Carbide
Tipped
The quirk topped ogee profile router bit is designed for creating decorative mouldings or edge profiles.
This cutter allows one to shape a convex and concave ogee shape with a bead.
An extra bead over the botto..
R 1,270.06
Ex VAT:R 1,104.40
Available Stock: In Stock
Model: KPFB238
Forstner
bit - Ø 2 3/8'
High-Speed
Steel
The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.
The Forstner bit is guided by the wide..
R 1,259.77
Ex VAT:R 1,095.45
Available Stock: In Stock
Model: KP851
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most lar..
R 1,258.96
Ex VAT:R 1,094.75
Available Stock: In Stock
Model: PT23060AL
SAW BLADE TCT 230 X 2.4 X 30 X 60T ALUM. PROF.....
R 1,245.85
Ex VAT:R 1,083.35
Available Stock: In Stock
Model: KP5
Spindle
cutter - Full bead/Half round/Bull nose 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut full beads, half rounds or a bull nose.
KP800020..
R 1,241.37
Ex VAT:R 1,079.45
Available Stock: In Stock
Model: KP10354
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load..
R 1,229.75
Ex VAT:R 1,069.35
Available Stock: In Stock
Model: KP49234
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 1,225.73
Ex VAT:R 1,065.85