Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP10354
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load..
R 1,229.75
Ex VAT:R 1,069.35
Available Stock: In Stock
Model: KP49234
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 1,225.73
Ex VAT:R 1,065.85
Available Stock: In Stock
Model: KP18232010
Multi-Mould router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full ..
R 1,214.63
Ex VAT:R 1,056.20
Available Stock: In Stock
Model: KPS6104
Euro Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,201.46
Ex VAT:R 1,044.75
Available Stock: In Stock
Model: KP2812
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by ..
R 1,196.52
Ex VAT:R 1,040.45
Available Stock: In Stock
Model: KP387
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,196.52
Ex VAT:R 1,040.45
Available Stock: In Stock
Model: KP17
Spindle
cutter - Quarter round 1/4' and 1/2'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds
KP800020 - 3/4' - 1/2' spacer rings
..
R 1,188.99
Ex VAT:R 1,033.90
Available Stock: In Stock
Model: KPFB212
Forstner
bit - Ø 2 1/2'
High-Speed
Steel
The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.
The Forstner bit is guided by the wide..
R 1,173.35
Ex VAT:R 1,020.30
Available Stock: In Stock
Model: KP10353
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load..
R 1,165.07
Ex VAT:R 1,013.10
Available Stock: In Stock
Model: KP1705
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before appl..
R 1,144.54
Ex VAT:R 995.25
Available Stock: In Stock
Model: PTBP010
The solution for installing knobs and pulls easily with repeatable accuracy
The Pro-Tech Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs, handles and pulls. The
moveable edge guide and measuring scales make it easy to position knobs accurately, while adjustable drill g..
R 1,141.95
Ex VAT:R 993.00
Available Stock: In Stock
Model: KP372461
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before appl..
R 1,132.81
Ex VAT:R 985.05