Plunge
cut Classical Pattern router bit
This
plunge type decorative profile cutter will eliminate uncomfortable sharp edges and
offer a quality look and feel to the workpiece.
Made
to cut grooves in surfaces. This router bit can also be used to profile the edge
of a workpiece when u..
Ovolo & Rounding Over bit
Carbide
Tipped
The ovolo and rounding over router bit has several other names in the
industry. Sometimes referred to a plunge/groove beading bit.
Create a flat bottom groove in between two quarter-round shapes. Cutting
a bit deeper lend extra depth to the a..
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-over, ..
Rabbeting Cutter
For
cutting rebatesRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternateive bearings with a larger outside diameter, the depth of
cut c..
Rabbeting Cutter
For
cutting rebatesRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternateive bearings with a larger outside diameter, the depth ..
Profile
router bits with plunge cut capability
Classical Plunge Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and ..
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut q..
Saw blade for circular saws
Carbide
Tipped - Saw blade for circular saws - Crosscut/Laminate
The professional saw blade cuts straight, accurately and vibration free.
High quality tungsten carbide is used with a micro grain structure to achieve
a high edge retention and remains sha..
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
Forstner
bit - Ø 32mm
High-Speed
Steel
The Forstner bit is optimized for woodworking applications to cut
exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many
hardware installations.
The Forstner bit is guided by the wide o..
Double
flute bottom cleaning straight bit
Carbide Tipped with bottom insert
A special-design straight router bit with a bottom cutter insert. Unlike common mortise
bits, these bits feature a special overlapping centre carbide tip design which guarantees
you a smooth and clean bottom cu..
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..