Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
Spindle
cutter - Glue joint (single F-joint)
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join..
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
Finger joint router bit
Carbide
Tipped - Finger joint
The router bit is a counter profile bit designed to join the end grains of wood. The finger joint is much stronger than the conventional butt joint, due to the increase of glue surface area.
The cutter is designed to be used in a ..
Spindle
cutter - 3 lip classic bead
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and coves
KP800020 - 3/4' - 1/2' spacer rings
..
Panel Raiser - Double Cove router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract acros..
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..