Edge
profile router bits
Bevel profile
Carbide Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ex..
Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain,..
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used fo..
Drawer lock router bit
Carbide
Tipped - Drawer lock
The router bit makes it easy to join drawers. The glue surface is greater
when compared to a standard butt joint, thus increasing the overall strength and
makes it easier with alignment during assembly.
The cutter is designe..
Drawer lock router bit
Carbide
Tipped - Drawer lock
The router bit makes it easy to join drawers. The glue surface is greater
when compared to a standard butt joint, thus increasing the overall strength and
makes it easier with alignment during assembly.
The cutter is designe..
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
Spare
blade
Router bit spare part
The cutter blade can be used as a spare blade for the KPFJ-01 finger
jointer or it can be added to the stack of finger jointer blades to have a
total of 4 blades.....
Spindle
cutter - Quarter round 3/8' and Bead 1/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and beads
KP800020 - 3/4' - 1/2' s..
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..