Available Stock: In Stock
Model: KP329031
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
6,35..
R 601.80
Ex VAT:R 523.30
Available Stock: In Stock
Model: KP320011
Large Bead router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
..
R 601.68
Ex VAT:R 523.20
Available Stock: In Stock
Model: KP210041
Profile
router bits with plunge cut capability
Ogee
shape
Use this carbide tipped plunge shape bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and their enlarg..
R 601.22
Ex VAT:R 522.80
Available Stock: In Stock
Model: KP1703
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before ..
R 600.07
Ex VAT:R 521.80
Available Stock: In Stock
Model: KP308431
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 598.29
Ex VAT:R 520.25
Available Stock: In Stock
Model: KP308441
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 598.06
Ex VAT:R 520.05
Available Stock: In Stock
Model: KP1205
Corner
Round Router bit
Carbide
Tipped
The
corner-rounding bit rounds an edge to a given radius. The tool is shouldered to
cut a fillet if required. The cut can be used to ease edges, as a simple profile,
or as a part of a complex one. Other names for this router bit are round-ov..
R 595.53
Ex VAT:R 517.85
Available Stock: In Stock
Model: KP208041
Ball cutting
router bit
Carbide
Tipped
Cut channels for pipes or cables using the ball end bit. The profile requires
the cut to be made in a single pass. To reduce stress on the bit, cut an initial
groove using a straight bit matching the diameter dimension of the ball end bit.
Cut chan..
R 593.57
Ex VAT:R 516.15
Available Stock: In Stock
Model: KP319041
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling/flipping the workpiece between passes.
The corner bead r..
R 593.17
Ex VAT:R 515.80
In Stock Soon
Available Stock: In Stock Soon
Model: KP7005
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 591.04
Ex VAT:R 513.95
Available Stock: In Stock
Model: KP1003
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 591.04
Ex VAT:R 513.95
Available Stock: In Stock
Model: KP213041
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
R 590.93
Ex VAT:R 513.85