Available Stock: In Stock
Model: KP1002
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 484.15
Ex VAT:R 421.00
Available Stock: In Stock
Model: KP114063
Two
flute Straight bit with bottom cutter insert
Carbide
Tipped
A special design straight router bit with a bottom cutter insert. Unlike common mortise bits, these bits feature a special overlapping centre carbide tip design
which guarantees you a smooth and clean bottom cut. Ideal for cut..
R 483.35
Ex VAT:R 420.30
Available Stock: In Stock
Model: KP3504
Rabbeting Cutter
For
cutting rebatesRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternateive bearings with a larger outside diameter, the depth of
cut c..
R 481.05
Ex VAT:R 418.30
Available Stock: In Stock
Model: KP22MM L-2
Two
flute Metric Straight bit
Carbide
Tipped
In choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut qual..
R 475.12
Ex VAT:R 413.15
Available Stock: In Stock
Model: KP306031
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..
R 475.12
Ex VAT:R 413.15
Available Stock: In Stock
Model: KP1134105
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead t..
R 474.66
Ex VAT:R 412.75
Available Stock: In Stock
Model: KP902
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..
R 474.66
Ex VAT:R 412.75
Available Stock: In Stock
Model: KP3103
Bevel
Trim bit
Carbide
Tipped
This is a 45 degree steel-bodied, carbide-tipped bit for bevel trimming laminate
with a standard router. The solid construction reduces vibration for the smoothest
cut possible with a two-flute bit. This is a popular profile for a modern look.
This r..
R 474.66
Ex VAT:R 412.75
Available Stock: In Stock
Model: KP1603
Edge
profile router bits
Roman Ogee profile
Carbide
Tipped
The roman ogee profile router bit is designed for creating decorative mouldings or edge profiles.
These cutters allow you to shape one concave and one convex shape. A bead over the top corner is possible when increasing
the dept..
R 474.66
Ex VAT:R 412.75
Available Stock: In Stock
Model: KP551-3
Spare cutter
Router
bit spare part
This ogee cutter cuts 12.7mm instead of the 9.5mm standard and is compatible
with
KP551 and
KP851.....
R 471.44
Ex VAT:R 409.95
Available Stock: In Stock
Model: KP368031
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a concave shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Bearing guide aids control and shaping
Smooth edge requires little or no sanding before applying..
R 468.28
Ex VAT:R 407.20
Available Stock: In Stock
Model: KP120461
Flush
Trim bit
Carbide
Tipped
Our flush trim bits feature outstanding tool longevity. Featuring excellent carbide
brazing, a broad selection of sizes and most importantly quality of cut. The flush
trim router bit cuts a variety of materials from wood, plywood, MDF and other wood
compos..
R 467.53
Ex VAT:R 406.55