Search Criteria
Products meeting the search criteria
Available Stock: In Stock
Model: KP49574
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may..
R 1,468.78
Ex VAT:R 1,277.20
Available Stock: In Stock
Model: KP49234
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 1,225.73
Ex VAT:R 1,065.85
Available Stock: In Stock
Model: KP49572
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used fo..
R 1,094.46
Ex VAT:R 951.70
Available Stock: In Stock
Model: KP49232
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 1,062.03
Ex VAT:R 923.50
Available Stock: In Stock
Model: KP234431B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..
R 1,028.85
Ex VAT:R 894.65
Available Stock: In Stock
Model: KP211432
Profile
router bits with plunge cut capability
Classical Plunge Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and ..
R 1,017.00
Ex VAT:R 884.35
Available Stock: In Stock
Model: KP238431
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
R 983.88
Ex VAT:R 855.55
Available Stock: In Stock
Model: KP234421B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..
R 767.40
Ex VAT:R 667.30
Available Stock: In Stock
Model: KP49230
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 700.87
Ex VAT:R 609.45
Available Stock: In Stock
Model: KP24152010
Point Cutting Ogee bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make ogee shaped panels for any project by routing side by side grooves on the face of the panel.
They may also be used ..
R 676.60
Ex VAT:R 588.35
Available Stock: In Stock
Model: KP211031
Profile
router bits with plunge cut capability
Classical Plunge Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and ..
R 669.88
Ex VAT:R 582.50
Available Stock: In Stock
Model: KP236021B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Pattern Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
..
R 669.70
Ex VAT:R 582.35
Brands meeting the search criteria
No Search criteria specified
Categories meeting the search criteria
No Search criteria specified
Information
No Search criteria specified